are you doing this exactly??
enable audio track you want tone on, select portion of track, go into audio effects, select tone generator
it will then appear as a clip effect.
to uninstall audio generator plugin, go to control panel and you will see the plugin listed, if not, you don't have it, then you'll have to install from CD.
make sure you change the audio level to -20 if you are in US, save it over the original file so it is always set correctly.
-----Original Message-----
From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM]On Behalf Of
Becky Geear
Sent: Thursday, June 30, 2005 4:12 PM
To: 'DS(at)Softimage.COM'
Subject: RE: Tone Generator?
Thanks to all of your help and emails! Here's what I've done. (and please
read to the bottom...I have another question.)
Murph -- Highlighted Track -- nothing happens (no red bar, nothin..all I
have done is successfully highlighted a section of the audio track.) =)
Audio is patched correctly to output.
Julie -- Expanded track -- still nothin'
John -- Set in and out points -- nothin'
Russ -- Looks like I'm going to have to go the reinstall route.
Now, here's my question. I tried John's other suggestion of having an audio
clip and added the tone generator as a clip effect. Here's what happens:
Normally, I would go to Audio Effects>Tone Generator. By choosing to go the
clip effect route, it brings up a dialog box....however, Tone Generator is
NOT listed whatsoever. What does that mean? How can it exist in one place,
but not the other? Here's another dumb question (since I've never had any
hands-on experience with installing/uninstalling anything on my
system)........how do I uninstall just the tone generator?
Thanks again for all of your help. It is very much appreciated!
Becky
> ----------
> From: Murphy, Paul
> Reply To: DS(at)Softimage.COM
> Sent: Thursday, June 30, 2005 12:19 PM
> To: DS(at)Softimage.COM
> Subject: RE: Tone Generator?
>
> Stupid answer - are you highlighting an audio track?
>
> Steps are:
>
> 1. Highlight audio track.
> 2. Select Audio Effects>Tone Generator
> 3. Set Tone Generator frequency and level
> 4. Play
>
> You'll also want to be sure that whatever track you put the tone
> generator on is patched in the audio tool to output correctly.
>
> Question: When you highlight and select tone generator - do you get a
> red bar on the timeline? Or does nothing happen?
>
> You may need to uninstall then reinstall tone generator.
>
> Murf
>
> -----Original Message-----
> From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf
> Of Becky Geear
> Sent: Thursday, June 30, 2005 12:58 PM
> To: 'DS(at)Softimage.COM'
> Subject: RE: Tone Generator?
>
> Hi!
>
> I'm on v. 7.5....the Tone Generator is listed under Audio Effects, but
> nothing happens when I highlight the track...does this mean that I still
> need to get it from the CD?
>
> > ----------
> > From: Benoit Melancon
> > Reply To: DS(at)Softimage.COM
> > Sent: Thursday, June 30, 2005 11:49 AM
> > To: DS(at)Softimage.COM
> > Subject: Re: Tone Generator?
> >
> > Hello Becky,
> >
> > Just select a portion of an audio track with the cursor (the selected
> > span will turn light grey) and choose Tone Generator. You don't need a
>
> > audio clip to apply the effetc.
> >
> > If the Tone generator is missing, it is because it is a separate
> > install on the DS software CD. Just pop in the CD and go within
> > "plugins". If you are on v7.6, it is a tick-mark option within the
> main install.
> >
> > Benoit
> >
> > Becky Geear wrote:
> >
> > >Hi,
> > >
> > >I'm going to ask a really basic and probably stupid question....but
> > >I've never used this function before. How do you generate tone? I
> > >noticed it under Audio Effects, but can't find any documentation on
> > >this in either
> > the
> > >help or in the manual. (Maybe I just can't work an index) =)~ I
> > >think
> > this
> > >has been discussed before, but I can't access the thread archives
> > >because
> > it
> > >says something about the site re-indexing. Can anyone help me out
> > >with this? Thanks so much!
> > >
> > >--
> > >Becky Geear
> > >Sr. Video Editor
> > >LAD Advertising/Lithia Motors, Inc.
> > >Medford, OR
> > >ph: 541-864-1757
> > >fax: 541-776-6553
> > >email: bgeear(at)lithia.com
> > >---
> > >Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in
> > body: subscribe ds
> > >Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text
> > >in
> > body: unsubscribe ds
> > >
> > >
> > >
> >
> > --
> >
> >
> > Benoit Melancon
> > Avid DS ACI/ACSR
> >
> > www.nadcentre.com
> >
> >
> > ---
> > Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in
> body:
> > subscribe ds
> > Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in
> > body: unsubscribe ds
> >
> >
> ---
> Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in
> body: subscribe ds Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the
> following text in body: unsubscribe ds
>
> ---
> Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body:
> subscribe ds
> Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in
> body: unsubscribe ds
>
>
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds
