|
Jeff,
If you
can access the menu fuctions
go to
menu option 006 and switch the local enable funcion on,
This
function will disable the front panel if the deck is being controlled remotely
(Ie if you're digitizing and dont want anyone to mess with the front
panel)
Hope
this helps
Best
Simon
Lip
Sync post
london
-----Original Message-----
From: owner-ds(at)Softimage.COM
[mailto:owner-ds(at)Softimage.COM]On Behalf Of Jeff Krebs
Sent:
29 July 2005 12:33
To: DS(at)Softimage.COM
Subject: Re: Help
Digital Betacam DVWA500 frozen OT
It's all the buttons on the front panel. I
can switch the inputs from SDI to componant though
----- Original Message -----
Sent: Friday, July 29, 2005 7:18
AM
Subject: RE: Help Digital Betacam
DVWA500 frozen OT
Ahh... it's the Eject button, not the Stop button...
T
:)
At 12:11 29/07/2005, you wrote:
You have probably tried this but if not.
Rewind the
tape.
Powercycle the VTR and hold the eject button on power
up.
Good luck
Tim
From: owner-ds(at)Softimage.COM [
mailto:owner-ds(at)Softimage.COM] On Behalf Of Jeff
Krebs
Sent: 29 July 2005 12:02
To:
DS(at)Softimage.COM
Subject: Help Digiital Betacam DVWA500 frozen
OT
Help on this OT
Digitizing from a betasp tape inside my DVWA500
I go to eject
the tape. The front panel buttons is frozen. I can't use any of the
buttons.
I
DOUBLE CHECK THE KEY INHIBIT BUTTON, to make sure I did not accidentally
hit it. Nothing wrong, the KEY INHIBIT IS OFF.
Remote is
disabled.
I
check everything, I was the only person around, Nobody touched my machine
2 minutes earlier. The only way I can use the Dbeta machine is
through a remote. from another machine or the DS.
Any
clues? Has the microprocessor that controls the front panels bit the
dust.
Thanks for any quick information.
Jeff
--
Internal Virus Database is out-of-date.
Checked by
AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.5 - Release Date:
26/12/2004
|
