Sean,
If the deck is fitted with the pull down
board(HKDV-507)then you will get the 1080i converted
signal on the PD OUTPUT(separate spigot), with
embedded audio and converted VITC(29.97).
Keep in mind this things:
1)For this setup to work, System frequency has to be
set at 23.98 and not 24
2)Consistent cadence requires both Tri Level and NTSC
reference to the deck
3)A frames are located at 00 and 05 countframes
4)Analog audio and LTC output are 2 frames advanced
from the PD OUTPUT
5)RS422 can be set to carry the converted TC(24>30),
so you can use a 1080i deck template, with the
corresponding 2 frames offset
Hope this helps,
Bogdan
--- sqitaos(at)aol.com wrote:
> I usually use a Teranex for frame rate conversion of
> this kind, but is it possible to convert 24p
> material to 1080i 59.94 playing back from a Sony
> F500? I know this deck has all the boards, so is
> this deep within the menus or a dipswitch on a card
> or a combination of both? Would love to know this
> before I suggest it. Thanks!
>
> Regards,
>
> Sean
>
>
>
>
> Sean E. Stall
> President / Avid DS Artist
> IRONIK DESIGN & POST
> EYE IMAGINE, INC.
>
> 240 E. 27TH STREET, SUITE 25G
> NEW YORK, NY 10016
>
> (O) 212-683-7225
> (C) 646-279-8808
>
> SQITAOS(at)AOL.COM
>
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds
