I think that means you can't... ;-)
Julie M.
-----Original Message-----
From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf
Of Andi Loor
Sent: 25 août 2005 13:42
To: DS(at)Softimage.COM
Subject: Re: Live Capture
Sylvain,
the question is how you do a recapture when there is no remote control?
Cheers
Andi
Sylvain Labrosse wrote:
> You answered your question. You must capture with timecode for the
> recapture to work. Otherwise, how magically would it work?
>
> Sylvain
>
>
>
------------------------------------------------------------------------
> *From:* owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] *On
> Behalf Of *Simon Graham
> *Sent:* Thursday, August 25, 2005 1:13 PM
> *To:* DS(at)Softimage.COM
> *Subject:* RE: Live Capture
>
> Thanks Sylvain,
> How exactly would you recapture, If there is no timecode control in
> the first instance??
>
> *Simon Graham*
> *LIP SYNC POST*
> *LONDON*
> *Tel: +44 (0) 7899 810644*
>
>
------------------------------------------------------------------------
> *From:* owner-ds(at)Softimage.COM on behalf of Sylvain Labrosse
> *Sent:* Thu 25/08/2005 17:41
> *To:* DS(at)Softimage.COM
> *Subject:* RE: Live Capture
>
> Live capture has been changed recently (7.5, or was it 7.6?) to
> support recapture, so yes it has been changed.
>
> As with Tape capture, DS is looking at the Source name and Timecode
> information, not the clip name. Keeping the same information will
> cause indeed this problem.
>
> So if you capture without a timecode feed (in the remote cable from
> the deck), Live capture behaves as before and starts its timecode at
> 00:00:00:00. The last captured media show for all previous captured
> clips.
>
> Feed timecode and Live capture will register this information and
> marks each Live captured clip with a different timecode, thus showing
> the correct media from each clips.
>
> And if you accidentally lose this material, you can now recapture, as
> before it was not possible. :-))
>
> Sylvain Labrosse
> Avid DS Support
> Escalation team
> http://www.softimage.com/avidds
> Check the v7.6 Learning Collection
>
>
>
------------------------------------------------------------------------
> *From:* owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] *On
> Behalf Of *Simon Graham
> *Sent:* Thursday, August 25, 2005 11:33 AM
> *To:* DS(at)Softimage.COM
> *Subject:* Live Capture
>
> I was wondering if this has changed in V7 ??
> On live capture I set a tape name and capture clips from a non-TC
source .
> Upon multiple captures DS ascends the name, but upon viewing the
> clips the media from one clip has been applied to all clips, as though
> you have captured different tapes but forgot to change the tape name?
> Previously on V6 I could capture from a non-tc source and not change
> tape names, the clips would be captured and retained as they were
> captured.
>
> Is this a bug or something that I'm missing.
>
> Thanks in advance
>
> Simon
>
> *Simon Graham*
> *LIP SYNC POST*
> *LONDON*
> *Tel: +44 (0) 7899 810644*
--
Andi Loor
www.andiloor.se
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in
body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in
body: unsubscribe ds
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds
