Re: Live Capture

[Andi Loor <andiloor(at)algonet.se>]

Sylvain wrote:

Live capture has been changed recently (7.5, or was it 7.6?) to 
> support recapture, so yes it has been changed.

I guess this isn't a recapture but a automatic resync of manually recaptured media? Semantics?
Andi



Julie Monette wrote:

> I think that means you can't...  ;-)
>
> Julie M.
> -----Original Message-----
> From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf
> Of Andi Loor
> Sent: 25 août 2005 13:42
> To: DS(at)Softimage.COM
> Subject: Re: Live Capture
>
> Sylvain,
> the question is how you do a recapture when there is no remote control?
> Cheers
> Andi
>
> Sylvain Labrosse wrote:
>
>  
>
> > You answered your question.  You must capture with timecode for the 
> > recapture to work.  Otherwise, how magically would it work?
> >
> > Sylvain
> >
> >
> >
> >    
> ------------------------------------------------------------------------
>  
>
> > *From:* owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] *On 
> > Behalf Of *Simon Graham
> > *Sent:* Thursday, August 25, 2005 1:13 PM
> > *To:* DS(at)Softimage.COM
> > *Subject:* RE: Live Capture
> >
> > Thanks Sylvain,
> > How exactly would you recapture, If there is no timecode control in 
> > the first instance??
> >
> > *Simon Graham*
> > *LIP SYNC POST*
> > *LONDON*
> > *Tel: +44 (0) 7899 810644*
> >
> >
> >    
> ------------------------------------------------------------------------
>  
>
> > *From:* owner-ds(at)Softimage.COM on behalf of Sylvain Labrosse
> > *Sent:* Thu 25/08/2005 17:41
> > *To:* DS(at)Softimage.COM
> > *Subject:* RE: Live Capture
> >
> > Live capture has been changed recently (7.5, or was it 7.6?) to 
> > support recapture, so yes it has been changed.
> >
> > As with Tape capture, DS is looking at the Source name and Timecode 
> > information, not the clip name.  Keeping the same information will 
> > cause indeed this problem.
> >
> > So if you capture without a timecode feed (in the remote cable from 
> > the deck), Live capture behaves as before and starts its timecode at 
> > 00:00:00:00.  The last captured media show for all previous captured 
> > clips.
> >
> > Feed timecode and Live capture will register this information and 
> > marks each Live captured clip with a different timecode, thus showing 
> > the correct media from each clips.
> >
> > And if you accidentally lose this material, you can now recapture, as 
> > before it was not possible.  :-))
> >
> > Sylvain Labrosse
> > Avid DS Support
> > Escalation team
> > http://www.softimage.com/avidds
> > Check the v7.6 Learning Collection
> >
> >
> >
> >    
> ------------------------------------------------------------------------
>  
>
> > *From:* owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] *On 
> > Behalf Of *Simon Graham
> > *Sent:* Thursday, August 25, 2005 11:33 AM
> > *To:* DS(at)Softimage.COM
> > *Subject:* Live Capture
> >
> > I was wondering if this has changed in V7 ??
> > On live capture I set a tape name and capture clips from a non-TC
> >    
> source .
>  
>
> > Upon multiple captures DS ascends the name,  but upon viewing the 
> > clips the media from one clip has been applied to all clips, as though
> >    
>
>  
>
> > you have captured different tapes but forgot to change the tape name?
> > Previously on V6 I could capture from a non-tc source and not change 
> > tape names,  the clips would be captured and retained as they were 
> > captured.
> >
> > Is this a bug or something that I'm missing.
> >
> > Thanks in advance
> >
> > Simon
> >
> > *Simon Graham*
> > *LIP SYNC POST*
> > *LONDON*
> > *Tel: +44 (0) 7899 810644*
> >    
>
>
>  

--
Andi Loor
www.andiloor.se


---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds