Bad news - HP lists that error code as system board or CPU. First thing
to try is full power down (physically unplugged) then power up (if your
Karma is in good shape :-)
Next thing to try is pulling the second CPU and see if it boots (if
you're brave) - it may have a bad VRM (onboard on that model) which will
limit it to one CPU.
Best course of action if power cycling doesn't work - Let HP deal with it.
Paul Neal wrote:
I have the HP 8200 as my RP machine and when I came in this morning
the darn thing wouldn't boot. All it does is blink an amber light
(where the green power light is) 9 times then pause and then blink again.
Any clues? Called Tewks Support andt their answer was, "Never seen
that before." Great.
Have to show a director something in 4 hours...and I still need to
build it. I can work without the RP, but it's VERY slow and I'm not
sure if everything saves correctly.
Thanks!
<sweating>
Paul
--
Richard Torpey
VP Engineering
Rhinoceros/MultiVideo Group
50 East 42 Street
New York, NY 10017
(212) 986-1577
(212) 986-3833 fax
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds
