=20
All of our functions seem to be back. All media originally on the
drives when the HAL warnings are there. No warnings on the drives.
=20
We do have a Gigabit that has been installed. At this time, the
engineers are keeping it in place. =20
=20
The SCSI card resides in the bottom slot. Hopefully this new board
solves this problem...
=20
Thanks Howard, Tom, Tony and Rich for your responses.
=20
=20
Fujio
HoustonPBS
=20
=20
________________________________
From: Chasteen, Howard [mailto:Howard.Chasteen(at)fotf.org]=20
Sent: Wednesday, November 16, 2005 10:54 AM
To: DS(at)Softimage.COM
Subject: RE: << Video Hal problems >>
=20
Hi Fujio,
=20
Exactly what boards are you running in which slots on the EVO? That is
critical. Have you added anything such as a Gigabit board? That can be
problematic in the older W8000. The data Buss has very limited
resources. Did you disable the on board SCSI and what slot are you
running the SCSI host card in?
=20
There is a tricky routine to get a new host adaptor to recognize and
recall a stripe set crated by another board. It can be done.
=20
Howard
=20
________________________________
From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf
Of Watanabe, Fujio=20
Sent: Wednesday, November 16, 2005 9:41 AM
To: DS(at)Softimage.COM
Subject: RE: << Video Hal problems >>
Tom wrote:
=20
Are you on Unity?
We're not on Unity, Tom. Too bad this thread can't die, but our problem
hasn't been resolved.
=20
It seems that we may have a series of issues that may or may not be
related to each other:
=20
Drives:
At least one bad drive (we're getting one or two "!" warnings in the
Windows Disk Manager).=20
=20
SCSI Board/Cables:
We haven't done a read/write test on the arrays yet, because our SCSI
board only intermittently shows up when we've rebooted. Cables have
been replaced and the board reseated (maybe too many times at this
point). We attempted to replace it with a SCSI board from our reseller.
It does recognize the arrays and then freezes on the last stages of boot
up. With the old one back in we can reboot properly.
=20
Our theories at this time:
Problem with the original SCSI Board and the replacement. (Maybe
firmware or we've missed a step in the setup)=20
Problem with SCSI board to Motherboard connection.
All the above and a problem with one or more drives.
=20
=20
We're waiting to talk to our reseller...
=20
Regards,
=20
Fujio
HoustonPBS
=20
DS/HD 6.02 QFE 2 Compaq Evo
=20
=20
=20
=20
________________________________
From: Tom Edwards [mailto:tdcone(at)bellsouth.net]=20
Sent: Tuesday, November 15, 2005 8:02 PM
To: DS(at)Softimage.COM
Subject: Re: << Video Hal problems >>
=20
Are you on Unity?
Tom Edwards
MTV Networks
Watanabe, Fujio wrote:
We're at a loss here with this error:
=20
Avid/DS Video Hal has reported the following conditions:
-video hardware is having difficulty reading image.
-Stream reader disk read reformat failed. Please Try Again.
-Video hardware is having difficulty reading images.
-Waiting time to get image expired. Please try again.
=20
We're thinking a drive issue. Any suggestions?
=20
DS/HD 6.02 QFE 2 Equinox=20
=20
=20
Fujio=20
HoustonPBS
------_=_NextPart_001_01C5EB8E.58635849
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:st1=3D"urn:schemas-microsoft-com:office:smarttags" =
xmlns=3D"http://www.w3.org/TR/REC-html40";>
<head>
<meta http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dus-ascii">
<meta name=3DGenerator content=3D"Microsoft Word 11 (filtered medium)">
<!--[if !mso]>
<style>
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style>
<![endif]--><o:SmartTagType
namespaceuri=3D"urn:schemas-microsoft-com:office:smarttags" =
name=3D"PersonName"/>
<!--[if !mso]>
<style>
st1\:*{behavior:url(#default#ieooui) }
</style>
<![endif]-->
<style>
<!--
/* Font Definitions */
(at)font-face
{font-family:Helvetica;
panose-1:2 11 6 4 2 2 2 2 2 4;}
(at)font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
(at)font-face
{font-family:Verdana;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";
color:black;}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:blue;
text-decoration:underline;}
p
{mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman";
color:black;}
span.EmailStyle18
{mso-style-type:personal;
font-family:Arial;
color:navy;}
span.EmailStyle19
{mso-style-type:personal;
font-family:Arial;
color:navy;}
span.EmailStyle20
{mso-style-type:personal-reply;
font-family:Arial;
color:navy;}
(at)page Section1
{size:8.5in 11.0in;
margin:1.0in 1.25in 1.0in 1.25in;}
div.Section1
{page:Section1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body bgcolor=3Dwhite lang=3DEN-US link=3Dblue vlink=3Dblue>
<div class=3DSection1>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>It seems that our DS issues may =
have been
resolved. Our broadcast engineers felt there was an problem =
related to the
A SCSI channel. When we switched out to a new board, we =
couldn’t
get past the boot process. <o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Somebody finally figured out =
to:<o:p></o:p></span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dblack
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:windowtext'>“Go
into SCSI bios on boot-up and then go into the configuration menu. =
From
there go to 'advanced' and disable 'interrupt 13' but allow it to =
scan.”<o:p></o:p></span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dblack
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:windowtext'><o:p> =
</o:p></span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'>All of
our functions seem to be back. All media originally on the drives =
when
the HAL warnings are there. No warnings on the =
drives.<o:p></o:p></span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'><o:p> </o:p>=
</span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'>We do
have a Gigabit that has been installed. At this time, the =
engineers are
keeping it in place. <o:p></o:p></span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'><o:p> </o:p>=
</span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'>The SCSI
card resides in the bottom slot. Hopefully this new board solves =
this
problem…<o:p></o:p></span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'><o:p> </o:p>=
</span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'>Thanks
Howard, Tom, Tony and Rich for your =
responses.<o:p></o:p></span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'><o:p> </o:p>=
</span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'><o:p> </o:p>=
</span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'>Fujio<o:p></o:p><=
/span></font></p>
<p class=3DMsoNormal style=3D'text-autospace:none'><font size=3D2 =
color=3Dnavy
face=3DArial><span =
style=3D'font-size:10.0pt;font-family:Arial;color:navy'>HoustonPBS<o:p></=
o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<div>
<div class=3DMsoNormal align=3Dcenter style=3D'text-align:center'><font =
size=3D3
color=3Dblack face=3D"Times New Roman"><span =
style=3D'font-size:12.0pt;color:windowtext'>
<hr size=3D2 width=3D"100%" align=3Dcenter tabindex=3D-1>
</span></font></div>
<p class=3DMsoNormal><b><font size=3D2 color=3Dblack face=3DTahoma><span
style=3D'font-size:10.0pt;font-family:Tahoma;color:windowtext;font-weight=
:bold'>From:</span></font></b><font
size=3D2 color=3Dblack face=3DTahoma><span =
style=3D'font-size:10.0pt;font-family:Tahoma;
color:windowtext'> Chasteen, Howard [mailto:Howard.Chasteen(at)fotf.org] =
<br>
<b><span style=3D'font-weight:bold'>Sent:</span></b> Wednesday, November =
16, 2005
10:54 AM<br>
<b><span style=3D'font-weight:bold'>To:</span></b> <st1:PersonName =
w:st=3D"on">DS(at)Softimage.COM</st1:PersonName><br>
<b><span style=3D'font-weight:bold'>Subject:</span></b> RE: << =
Video Hal
problems >></span></font><font color=3Dblack><span =
style=3D'color:windowtext'><o:p></o:p></span></font></p>
</div>
<p class=3DMsoNormal><font size=3D3 color=3Dblack face=3D"Times New =
Roman"><span
style=3D'font-size:12.0pt'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D3 color=3Dblue face=3DVerdana><span =
style=3D'font-size:
12.0pt;font-family:Verdana;color:blue'>Hi Fujio,</span></font><font
color=3Dblack><span =
style=3D'color:windowtext'><o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D3 color=3Dblack face=3D"Times New =
Roman"><span
style=3D'font-size:12.0pt;color:windowtext'> <o:p></o:p></span></fon=
t></p>
<p class=3DMsoNormal><font size=3D3 color=3Dblue face=3DVerdana><span =
style=3D'font-size:
12.0pt;font-family:Verdana;color:blue'>Exactly what boards are you
running in which slots on the EVO? That is critical. Have you added =
anything
such as a Gigabit board? That can be problematic in the older W8000. The =
data
Buss has very limited resources. Did you disable the on board SCSI and =
what
slot are you running the SCSI host card in?</span></font><font =
color=3Dblack><span
style=3D'color:windowtext'><o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D3 color=3Dblack face=3D"Times New =
Roman"><span
style=3D'font-size:12.0pt;color:windowtext'> <o:p></o:p></span></fon=
t></p>
<p class=3DMsoNormal><font size=3D3 color=3Dblue face=3DVerdana><span =
style=3D'font-size:
12.0pt;font-family:Verdana;color:blue'>There is a tricky routine to get =
a new
host adaptor to recognize and recall a stripe set crated by another =
board. It
can be done.</span></font><font color=3Dblack><span =
style=3D'color:windowtext'><o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D3 color=3Dblack face=3D"Times New =
Roman"><span
style=3D'font-size:12.0pt;color:windowtext'> <o:p></o:p></span></fon=
t></p>
<p class=3DMsoNormal><font size=3D3 color=3Dblue face=3DVerdana><span =
style=3D'font-size:
12.0pt;font-family:Verdana;color:blue'>Howard</span></font><font =
color=3Dblack><span
style=3D'color:windowtext'><o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D3 color=3Dblack face=3D"Times New =
Roman"><span
style=3D'font-size:12.0pt;color:windowtext'><o:p> </o:p></span></fon=
t></p>
<div class=3DMsoNormal align=3Dcenter style=3D'text-align:center'><font =
size=3D3
color=3Dblack face=3D"Times New Roman"><span =
style=3D'font-size:12.0pt;color:windowtext'>
<hr size=3D2 width=3D"100%" align=3Dcenter tabIndex=3D-1>
</span></font></div>
<p class=3DMsoNormal style=3D'margin-bottom:12.0pt'><b><font size=3D2 =
color=3Dblack
face=3DTahoma><span =
style=3D'font-size:10.0pt;font-family:Tahoma;color:windowtext;
font-weight:bold'>From:</span></font></b><font size=3D2 color=3Dblack =
face=3DTahoma><span
style=3D'font-size:10.0pt;font-family:Tahoma;color:windowtext'>
owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] <b><span
style=3D'font-weight:bold'>On Behalf Of </span></b><st1:PersonName =
w:st=3D"on">Watanabe,
Fujio </st1:PersonName><br>
<b><span style=3D'font-weight:bold'>Sent:</span></b> Wednesday, November =
16, 2005
9:41 AM<br>
<b><span style=3D'font-weight:bold'>To:</span></b> <st1:PersonName =
w:st=3D"on">DS(at)Softimage.COM</st1:PersonName><br>
<b><span style=3D'font-weight:bold'>Subject:</span></b> RE: << =
Video Hal
problems >></span></font><font color=3Dblack><span =
style=3D'color:windowtext'><o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Tom =
wrote:<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal style=3D'margin-bottom:12.0pt'><font size=3D3 =
color=3Dblack
face=3DHelvetica><span =
style=3D'font-size:12.0pt;font-family:Helvetica'>Are you on
Unity?</span></font><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>We’re not on Unity, =
Tom. Too
bad this thread can’t die, but our problem hasn’t been =
resolved.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>It seems that we may have a series =
of
issues that may or may not be related to each =
other:<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Drives:<o:p></o:p></span></font></p>=
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>At least one bad drive (we’re
getting one or two “!” warnings in the Windows Disk =
Manager). <o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>SCSI =
Board/Cables:<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>We haven’t done a read/write =
test on
the arrays yet, because our SCSI board only <u>intermittently</u> shows =
up when
we’ve rebooted. Cables have been replaced and the board =
reseated
(maybe too many times at this point). We attempted to replace it =
with a
SCSI board from our reseller. It does recognize the arrays and =
then
freezes on the last stages of boot up. With the old one back in we =
can
reboot properly.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Our theories at this =
time:<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Problem with the original SCSI =
Board and
the replacement. (Maybe firmware or we’ve missed a step in the =
setup) <o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Problem with SCSI board to =
Motherboard
connection.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>All the above and a problem with =
one or
more drives.<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>We’re waiting to talk to our
reseller…<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Regards,<o:p></o:p></span></font></p=
>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Fujio<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>HoustonPBS<o:p></o:p></span></font><=
/p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>DS/HD 6.02 QFE 2 Compaq =
Evo<o:p></o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<div>
<div class=3DMsoNormal align=3Dcenter style=3D'text-align:center'><font =
size=3D3
color=3Dblack face=3D"Times New Roman"><span =
style=3D'font-size:12.0pt;color:windowtext'>
<hr size=3D2 width=3D"100%" align=3Dcenter tabIndex=3D-1>
</span></font></div>
<p class=3DMsoNormal><b><font size=3D2 color=3Dblack face=3DTahoma><span
style=3D'font-size:10.0pt;font-family:Tahoma;color:windowtext;font-weight=
:bold'>From:</span></font></b><font
size=3D2 color=3Dblack face=3DTahoma><span =
style=3D'font-size:10.0pt;font-family:Tahoma;
color:windowtext'> Tom Edwards [mailto:tdcone(at)bellsouth.net] <br>
<b><span style=3D'font-weight:bold'>Sent:</span></b> Tuesday, November =
15, 2005
8:02 PM<br>
<b><span style=3D'font-weight:bold'>To:</span></b> <st1:PersonName =
w:st=3D"on">DS(at)Softimage.COM</st1:PersonName><br>
<b><span style=3D'font-weight:bold'>Subject:</span></b> Re: << =
Video Hal
problems >></span></font><font color=3Dblack><span =
style=3D'color:windowtext'><o:p></o:p></span></font></p>
</div>
<p class=3DMsoNormal><font size=3D3 color=3Dblack face=3D"Times New =
Roman"><span
style=3D'font-size:12.0pt'><o:p> </o:p></span></font></p>
<p class=3DMsoNormal style=3D'margin-bottom:12.0pt'><font size=3D3 =
color=3Dblack
face=3DHelvetica><span =
style=3D'font-size:12.0pt;font-family:Helvetica'>Are you on
Unity?<br>
Tom Edwards<br>
MTV Networks<br>
</span></font><br>
<st1:PersonName w:st=3D"on">Watanabe, Fujio =
</st1:PersonName>wrote:<o:p></o:p></p>
<blockquote =
style=3D'margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt'>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>We’re at a loss here with =
this error:<U1:P></U1:P></span></font><o:p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><U1:P> </U1:P></span></font><o:=
p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Avid/DS Video Hal has reported the
following conditions:<U1:P></U1:P></span></font><o:p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>-video hardware is having =
difficulty
reading image.<U1:P></U1:P></span></font><o:p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>-Stream reader disk read reformat =
failed.
Please Try Again.<U1:P></U1:P></span></font><o:p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>-Video hardware is having =
difficulty
reading images.<U1:P></U1:P></span></font><o:p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>-Waiting time to get image expired. =
Please
try again.<U1:P></U1:P></span></font><o:p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><U1:P> </U1:P></span></font><o:=
p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>We’re thinking a drive =
issue.
Any suggestions?<U1:P></U1:P></span></font><o:p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><U1:P> </U1:P></span></font><o:=
p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>DS/HD 6.02 QFE 2 =
Equinox <U1:P></U1:P></span></font><o:p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><U1:P> </U1:P></span></font><o:=
p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'><U1:P> </U1:P></span></font><o:=
p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>Fujio =
<U1:P></U1:P></span></font><o:p></o:p></p>
<p class=3DMsoNormal><font size=3D2 color=3Dnavy face=3DArial><span =
style=3D'font-size:
10.0pt;font-family:Arial;color:navy'>HoustonPBS<U1:P></U1:P></span></font=
><o:p></o:p></p>
</blockquote>
</div>
</body>
</html>
------_=_NextPart_001_01C5EB8E.58635849--
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds
