NO ideas...wost case...switch the cables, re-route 5-8 and do a second
pass.
KJ
-----Original Message-----
From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf
Of Marc Fisher
Sent: Tuesday, November 22, 2005 11:24 AM
To: 'DS(at)Softimage.COM'
Subject: DS 7.6 QFE2 8ch audio to D5
Yesterday we tried laying off 8 channels of audio to a D5 machine. The
same
D5 I captured the 8 from. The machine would only see 4 channels. When we
switched the controller to an SR controller, we had 8 channels. I made a
new
D5(3700) controller, and tried again. Same thing. We have an excellent
engineering staff and they went over the D5 for an hour. Still no
channels
5-8.
I've done a ton of work a various facilities doing 8 channels of audio,
and
as for the D5, I haven't seen this issue. The Sr used to have this in
7.6,
but qfe2 fixed that.
Any ideas? Or is this something so simple I should go see an Eye Doctor?
Marc
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in
body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in
body: unsubscribe ds
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.5/177 - Release Date:
11/21/2005
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.13.5/177 - Release Date:
11/21/2005
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds
