RE: DS 7.6 QFE2 8ch audio to D5

["Andrew Goyne" <Andrew.Goyne(at)usoc.org>]

You probably already checked - just in case.

On the deck, select "audio in" & then select F6 (PCM) to make sure audio settings are correct.

 

Make sure the deck is set to 24 bit, Set-up>System>F/F4

 

Check to see if the DS is actually outputting all 8 channels.What happens if you route ch 5,6,7,8 into channels 1-4 on the deck?

 

If all else fails - toss it off the highest mountain & call your insurance company. ;-0

 

ADFCBqWG

Andy Goyne | Post Production

U.S. Olympic Committee

719-866-4849

andy.goyne(at)usoc.org

 

---

From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf Of Marc Fisher
Sent: Tuesday, November 22, 2005 10:59 AM
To: 'DS(at)Softimage.COM'
Subject: RE: DS 7.6 QFE2 8ch audio to D5

the more eyes the better. yeah. all the tabs are turned in to reflect what the little diagram on the tape says. really wierd.

 

thanks andy

 

Marc

---

From: Andrew Goyne [mailto:Andrew.Goyne(at)usoc.org]
Sent: Tuesday, November 22, 2005 9:38 AM
To: DS(at)Softimage.COM
Subject: RE: DS 7.6 QFE2 8ch audio to D5

Hey Marc,
You & your engineers probably already looked, is tab C on the tape turned. That was my problem when I couldn't get 8 channels onto the tape. Easy oversight.
Sorry I could not be any more help,

ADFCBqWG

Andy Goyne | Post Production

U.S. Olympic Committee

719-866-4849

andy.goyne(at)usoc.org

-----Original Message-----
From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf Of Marc Fisher
Sent: Tuesday, November 22, 2005 10:24 AM
To: 'DS(at)Softimage.COM'
Subject: DS 7.6 QFE2 8ch audio to D5

Yesterday we tried laying off 8 channels of audio to a D5 machine. The same
D5 I captured the 8 from. The machine would only see 4 channels. When we switched the controller to an SR controller, we had 8 channels. I made a new
D5(3700) controller, and tried again. Same thing. We have an excellent engineering staff and they went over the D5 for an hour. Still no channels 5-8.

I've done a ton of work a various facilities doing 8 channels of audio, and as for the D5, I haven't seen this issue. The Sr used to have this in 7.6, but qfe2 fixed that.

Any ideas? Or is this something so simple I should go see an Eye Doctor?

Marc
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds