RE: hp xw8000 boot problem HELP!!!

Date : Thu, 1 Dec 2005 17:01:37 -0500
To : <DS(at)Softimage.COM>
From : "Benoit Lauzon" <blauzon(at)Softimage.COM>
Subject : RE: hp xw8000 boot problem HELP!!!
Means that the lower video hardware abstraction layer could not instantiate.
 
But all you need to know is that this mostly happens when there is hardware trouble.
Either the hardware is badly connected, defective, or has bad firmware/drivers installed.
 
A call to support would be a good thing, imho.
 
Ben
-----Original Message-----
From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM]On Behalf Of Martin Stegmayer
Posted At: Thursday, December 01, 2005 4:56 PM
Posted To: ds
Conversation: hp xw8000 boot problem HELP!!!
Subject: RE: hp xw8000 boot problem HELP!!!

Next message: Lower HAL cannot be created.

 

 

What the f… does this mean?

 

 

martin

 


From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf Of Chasteen, Howard
Sent: Donnerstag, 01. Dezember 2005 22:35
To: DS(at)Softimage.COM
Subject: RE: hp xw8000 boot problem HELP!!!

 

Is there a pattern to the beeps? Like 4 short beeps pause 4 short beeps or something? You can get beep codes if part of your power supply voltages are wrong or missing too.

 

The BIOS uses the number of beeps and their spacing as a hint to the problem.

 

Howard

 


From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf Of Martin Stegmayer
Sent: Thursday, December 01, 2005 2:01 PM
To: DS(at)Softimage.COM
Subject: RE: hp xw8000 boot problem HELP!!!

I disconeected everything…Nitris, Raid, Network;

The only thing I get is a never ending beep from hp xw8000.

 

 

Help!!!!

 

martin

 


From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf Of Martin Stegmayer
Sent: Donnerstag, 01. Dezember 2005 21:49
To: DS(at)Softimage.COM
Subject: hp xw8000 boot problem HELP!!!

 

Hi!

 

 

Ok… I keep cool….

It`s 10 PM. I come to work a night shift. Starting DS Nitris 7.6. Boot Process takes 5 minutes. DS Software don´t start. I get LHal or HAL error.

 

Where is the Problem???

 

 

HELP me please?

 

 

 

martin


Search the Digital Studio List archives here or use the advanced search form to search across mailing lists. Searching help is available.
This site supposedly brought to you by Benjamin Grosser and the Imaging Technology Group.