I've had it happen. Usually the lines are a little bluish in color. Avid has
replaced pretty much every board in my system, last time they tried the
little ribbon cables that connect the codec to base PCI boards in the CPU.
Basically it comes and goes as it pleases.
Reseating all the cards and cables helps, sometimes. Replacing random cards
with new ones from Avid helps, sometimes. Usually it just goes away after a
day or two.
Some might see this as a major, show-stopping bug. Avid doesn't seem to give
it quite the same levity as I (or my clients) do.
Good luck.
-Todd
Union
> -----Original Message-----
> From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf Of
> Andi Loor
> Sent: Friday, January 13, 2006 10:08
> To: DS(at)Softimage.COM
> Subject: Re: Picture Noise Problem
>
> Check cables and sync.
> Good luck
> Andi
>
>
> Ken Sirulnick skrev:
>
> > Nitris V7.6 QFE2
> > HP XW8000
> >
> > Starting today, all images in Nitris started having some noise in
> > them. I've checked both 720p 59.94 and 1080i projects. Kind of like
> > short vertical lines throughout the picture. Almost like film
> > scratches, but this happens on video originated material as well. We
> > rebooted the system with the same results. I am about to check to see
> > if outputs to tape have the same problem. Anyone seen this? I also
> > want to try reseating Nitris boards. Any help is appreciated. Thanks,
> >
> > KEN
>
>
> --
> Andi Loor
> www.andiloor.se
>
> ---
> Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body:
> subscribe ds
> Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in
> body: unsubscribe ds
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds
