|
Ken,
A variation on Murph's post... I think you have to limit the
audio input to the DVCAM deck in the menus to 2 channels not 4 or the 48k
will not work.
Anyone??
Howard
From: owner-ds(at)Softimage.COM
[mailto:owner-ds(at)Softimage.COM] On Behalf Of Murphy, Paul
Sent:
Wednesday, January 18, 2006 10:13 AM
To:
DS(at)Softimage.COM
Subject: RE: HD Deck Downconvert
Question
Hi Ken,
Are you running 2 channels of audio or 4? 2 Channels
run at 48K. 4 Channels run at 32K. Can't do 4 channels of 48K on a
DSR2000 (or any other DVCam machine - that I'm aware of).
Murf
From: owner-ds(at)Softimage.COM
[mailto:owner-ds(at)Softimage.COM] On Behalf Of Ken
Sirulnick
Sent: Wednesday, January 18, 2006 10:08 AM
To:
DS(at)Softimage.COM
Subject: HD Deck Downconvert
Question
HDW S2000 HDCam Deck
AJA HD10MD3 HD to SD Digital
Downconverter
HDCam 23.98 Tape playing back in HDW S2000 thru AJA
Downconverter SDI in and out into DVW-A500. Video and Audio come thru the
SDI input into the Digibeta fine. When the SDI out of the AJA is patched
into the SDI in of a DSR2000 DVCam deck, Video is fine but there is no
audio. Anyone have any experience with this and know why I can get audio
via SDI downconvert into the Digibeta but not into the DVCam Deck?
TIA
KEN
| 
