Annael,
Do you have the latest QFE installed. I believe it is QFE 3 for 7.6
Howard
-----Original Message-----
From: owner-ds(at)Softimage.COM [mailto:owner-ds(at)Softimage.COM] On Behalf Of Annaël Beauchemin
Sent: Wednesday, January 25, 2006 5:29 PM
To: DS(at)Softimage.COM
Subject: Re: Miranda HDV sync problems
well well...
It turns out that when I disable the reference on the HD130, sync is
ok. Is there a way to disable sync on the Equinox? i've tried
disconnecting both the genlock input and the sync cable, but didn't
solve my problem. There must be a way?
Annaël Beauchemin
On 25-Jan-06, at 5:26 PM, Annaël Beauchemin wrote:
> I just connected the miranda to our HD130 and the signal comes out of
> sync there too. So it's not the equinox and it's not the camera
> either: the colorbar out of the Miranda to the HD130 also comes out of
> sync.
>
> I'll recontact Miranda tomorrow.
>
> thank you both!
>
> Annaël Beauchemin
>
>
>
>
> 2006/1/25, Ben Folts <Ben(at)chainsawedit.com>:
>> Make sure you have the most updated version of the firmware for the
>> miranda. Contact the company if you have to. That is what we did
>> when having sync problems. God Speed.
>>
>>
>> Ben
>>
>> On Jan 25, 2006, at 1:12 PM, <pat-list(at)horridge.demon.co.uk> wrote:
>>
>>> Soryy can't help as we have a Nitris rather than the Equinox.
>>> Can't imagine the TriSync will make any differnece as the Miranda
>>> can't be
>>> referenced (nor can the HDV deck)
>>> So the capture has to free lock to the incoming HD-SDI signal.
>>> I presume you have tried various deck templates. I think they
>>> suggest the
>>> DVW-500 template.
>>>
>>>
>>>> -----Original Message-----
>>>> From: Annaël Beauchemin [mailto:lecoyote(at)gmail.com]
>>>> Sent: Wednesday, January 25, 2006 8:41 PM
>>>> Subject: Miranda HDV sync problems
>>>>
>>>> Hello
>>>>
>>>> We are trying to capture HDV material using the Miranda
>>>> HD-Bridge, but the picture gets offset verticaly once
>>>> captured. It seems the DS had a problem syncing the Miranda ouptut.
>>>>
>>>> When we do a Live capture, it captures fine, all synced up.
>>>> It's the Tape capture (batch capture) that is problematic.
>>>> Batch capture is supported with the Miranda and our workflow
>>>> depends on it.
>>>>
>>>> When we playback from the HDV camera, our HD-SDI monitor
>>>> display a correctly synced picture at all time. This monitor
>>>> is hooked up to the HD-SDI output of the Equinox. I'm not
>>>> sure if the monitor itself corrects the sync, or if the sync
>>>> problem lies between the BOB and the PCI card.
>>>>
>>>> Tape capture works fine with our Panasonic HD130, so it's
>>>> between Miranda and DS.
>>>>
>>>> Also, since we updated the firmware of the Miranda to 2.04,
>>>> the RS422 control seems erratic: it starts to play, then
>>>> stops. We have to hit play 3 times before it plays correctly.
>>>>
>>>> So my question is... is there anyone using a Miranda
>>>> HD-Bridge sucessfully with an Equinox-based DS? Miranda tech
>>>> support told us that the HD bridge was only tested with Nitris....
>>>>
>>>> Also, we do not have a tri-level sync, only a SD blackburst
>>>> generator.
>>>> We have tried disconnecting it from the Equinox.
>>>>
>>>> Thanx,
>>>> Annaël Beauchemin
>>>> Mirage3dfx
>>>>
>>>> DS 7.6 qfe 3
>>>> Compaq EVO w8000
>>>> Equinox
>>>> Miranda HD-Bridge DecXC v2.04
>>>> Sony HDR-Z1U camera
>>>> 1080i NTSC footage shot NDF
>>>>
>>>> ------------------------------
>>>>
>>>>
>>>
>>>
>>>
>>> ---
>>> Subscribe? E-mail Majordomo(at)Softimage.COM with the following text
>>> in body: subscribe ds
>>> Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text
>>> in body: unsubscribe ds
>>
>>
>> ---
>> Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in
>> body: subscribe ds
>> Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text
>> in body: unsubscribe ds
>>
>
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds
---
Subscribe? E-mail Majordomo(at)Softimage.COM with the following text in body: subscribe ds
Unsubscribe? E-Mail Majordomo(at)Softimage.COM with the following text in body: unsubscribe ds
