they render fine now and then... it's when the heavy renders comes in
that it fails... well.. only some machines and not always the same
machines.
regards
stefan
On 7/21/05, Sandy Sutherland <sandy(at)refinery.co.za> wrote:
> BTW just to go off on a tanget - you have tried rendering locally on these
> machines with dirtmap to make sure that it is not something silly like a
> missing msvcr dll???
>
> S.
>
> ----------------------------------------------------------
> Sandy Sutherland Digital Doodeller - TD
> The Refinery (Cape) http://www.refinery.co.za
> mailto:sandy(at)refinery.co.za
> (P) (+27 21) 480 3132 (F) (+27 21) 480 3101
> ----------------------------------------------------------
>
> ----- Original Message -----
> From: "Stefan Andersson" <sanders3d(at)gmail.com>
> To: <XSI(at)Softimage.COM>
> Sent: Thursday, July 21, 2005 11:20 AM
> Subject: Re: Workgroup issues with farm
>
>
> > there are 10 dual opterons (with batchserv and WinXP Sp2). Then there
> > is a Linux fileserver which also contains the workgroup. As Andi said,
> > it's only when they are using dirtmap where the problem occurs.
> >
> > We are using Batchserv at the moment, but are also doing some tests
> > with Rush (since XSI is not the only software that is going to be used
> > by the farm). I'm still configuring Rush, and haven't done much with
> > it right now since I'm knee deep into production at the moment.
> > But from the looks of it I can see the good potential in Rush... If
> > only the sysadmin could get back from his vacation :)
> >
> > regards
> > stefan "who is now installing the workgroups localy on each machine"
> > andersson
> >
> >
> > On 7/21/05, Sandy Sutherland <sandy(at)refinery.co.za> wrote:
> >> I don't have any problems like this at all! What are your specs - what
> >> software do you use to manage your farm?
> >>
> >> S.
> >>
> >> ----------------------------------------------------------
> >> Sandy Sutherland Digital Doodeller - TD
> >> The Refinery (Cape) http://www.refinery.co.za
> >> mailto:sandy(at)refinery.co.za
> >> (P) (+27 21) 480 3132 (F) (+27 21) 480 3101
> >> ----------------------------------------------------------
> >>
> >> ----- Original Message -----
> >> From: "Stefan Andersson" <sanders3d(at)gmail.com>
> >> To: <XSI(at)Softimage.COM>
> >> Sent: Thursday, July 21, 2005 10:35 AM
> >> Subject: Workgroup issues with farm
> >>
> >>
> >> > Hi All,
> >> >
> >> > I guess I'm not the only one that has problems with workgroups and
> >> > rendering through a farm. For me the situation seems to get worse(?!).
> >> > I can submit about 5-10 jobs, then the workgroups needs to be reset...
> >> > Soo... any tips for this other then using telnet to reset them?
> >> >
> >> > regards
> >> > stefan andersson
> >> >
> >> > --
> >> > http://www.sanders3d.com/
> >> >
> >> > ---
> >> > Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in
> >> > body:
> >> > unsubscribe xsi
> >>
> >> ---
> >> Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in
> >> body:
> >> unsubscribe xsi
> >>
> >
> >
> > --
> > http://www.sanders3d.com/
> >
> > ---
> > Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
> > unsubscribe xsi
>
> ---
> Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
> unsubscribe xsi
>
--
http://www.sanders3d.com/
---
Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
unsubscribe xsi
