Perhaps putting in the correct hostname will fix the problem? It's your
computer's name. ipconfig /all from command line and get the name from there
if you don't know it.
-----Original Message-----
From: owner-xsi(at)Softimage.COM [mailto:owner-xsi(at)Softimage.COM] On Behalf Of
Chris
Sent: Wednesday, May 10, 2006 10:08 PM
To: Will Mendez
Subject: Re[4]: 1 licence for two different versions
Hello Will, I did that all it says is "_SPM_HOST=" nothing more is
there ?!?!
Christopher
Wednesday, May 10, 2006, 3:18:36 PM, you wrote:
> Chris,
> Make sure that your setenv file is pointing to the same SPM sever as your
4.2 install.
> Run the usertools application in your Softimage 5.1 Programs Group
> and select edit File-setenv.bat. Scroll all the way to the bottom
> until you see the line that reads set _SPM_HOST= and confirm that the
correct hostname is there.
> You can open up the same file for the 4.2 Programs group to compare both
of them.
> Hope this helps
> Regards,
> Will
> -----Original Message-----
> From: owner-xsi(at)Softimage.COM [mailto:owner-xsi(at)Softimage.COM] On Behalf
Of Chris
> Posted At: Wednesday, May 10, 2006 2:53 PM
> Posted To: xsi
> Conversation: Re[2]: 1 licence for two different versions
> Subject: Re[2]: 1 licence for two different versions
> Hello Tim, I am thinking even though it is a 5.1 licence here. It
> is running 4.2 fine but as you said blocking 5.1 from running. Oh
> crap how do I figure this web out. <sigh>
> Christopher
> Wednesday, May 10, 2006, 4:34:04 AM, you wrote:
>> What do the Lictools say?
>> Did you actually *install* the new 5.x license or are you trying to
>> run the version 5 from the old 4.2 license, e.g. just installed the
>> program but not the new licensefile?
>> Theoretically, it should be possible to run 4.2 and 5.x
>> simultaneously, as long as you keep the licensefiles organized
>> correctly, you should be able to *merge* them in the keydatabase and
>> run both progs, each with it´s own key. The help and two nights
>> without sleeping much should get you there (I can´t help much, I´m
>> coming from the MayaFlexLMside, SPM is a bit new for me too but should
>> be the same route).
>> Basically, check your license, see if it´s registered correctly and if
>> running the 4.2 would block the start of the 5.x
>> Cheers
>> tim
>> ----- Original Message -----
>> From: "Chris" <walksfar(at)netscape.ca>
>> To: "Bernard Lebel" <XSI(at)Softimage.COM>
>> Sent: Wednesday, May 10, 2006 5:38 AM
>> Subject: Re[4]: 1 licence for two different versions
>>> Hello Bernard, no only 1 xsi at a time.
>>>
>>> Christopher
>>>
>>>
>>> Tuesday, May 9, 2006, 9:19:17 PM, you wrote:
>>>
>>>> Are you trying to run 2 instances of XSI?
>>>
>>>
>>>
>>>> On 5/9/06, Chris <walksfar(at)netscape.ca> wrote:
>>>>> Hello Stephen, what are we doing wrong over here I keep getting error:
>>>>> Error: there is no interactive licence to run XSI
>>>>> what that mean SPM is running fine for 4.2 ?
>>>>>
>>>>> Christopher
>>>>>
>>>>> Tuesday, May 9, 2006, 8:39:05 PM, you wrote:
>>>>>
>>>>> > Yes.
>>>>>
>>>>> > For example, if you had 4.2 and then upgraded to 5.0, your 5.0
license
>>>>> > will still work with 4.2.
>>>>>
>>>>> > Of course, if you have one license, you can run one version only at
a
>>>>> > time.
>>>>>
>>>>> > Steve
>>>>>
>>>>> > -----Original Message-----
>>>>> > From: owner-xsi(at)Softimage.COM [mailto:owner-xsi(at)Softimage.COM] On
Behalf
>>>>> > Of Chris
>>>>> > Sent: May 9, 2006 8:28 PM
>>>>> > To: XSI(at)Softimage.COM
>>>>> > Subject: 1 licence for two different versions
>>>>>
>>>>> > Hello, is it possible to run 1 licence for newer xsi version and run
>>>>> > same licence for older xsi version?
>>>>>
>>>>> > Christopher
>>>>>
>>>>> > ---
>>>>> > Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in
>>>>> > body:
>>>>> > unsubscribe xsi
>>>>>
>>>>> > ---
>>>>> > Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in
body:
>>>>> > unsubscribe xsi
>>>>>
>>>>>
>>>>> --
>>>>> Best regards,
>>>>> Chris mailto:walksfar(at)netscape.ca
>>>>>
>>>>> ---
>>>>> Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in
body:
>>>>> unsubscribe xsi
>>>>>
>>>
>>>> ---
>>>> Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in
body:
>>>> unsubscribe xsi
>>>
>>>
>>> --
>>> Best regards,
>>> Chris mailto:walksfar(at)netscape.ca
>>>
>>> ---
>>> Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in
body:
>>> unsubscribe xsi
>>>
>> ---
>> Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in
body:
>> unsubscribe xsi
--
Best regards,
Chris mailto:walksfar(at)netscape.ca
---
Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
unsubscribe xsi
---
Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
unsubscribe xsi
