Hi Tim,
Some good tips there, thanks. But I was just wondering why you said "Don´t
trust the export as "model" function"?
Have you had a bad experience with exporting EMDLs?
Andy
-----Original Message-----
From: owner-xsi(at)Softimage.COM [mailto:owner-xsi(at)Softimage.COM] On Behalf Of
Tim Leydecker
Sent: 30 May 2006 23:00
To: XSI(at)Softimage.COM
Subject: Re: XSI Montreal "Tips & Tricks" session, looking for presenters
Hi Bernard,
Im not from the area and probably not the most prestigous presenter to be
sought either. I´ll still take ten minutes to share some tips&tricks that
would have saved me some time during the last week. Mostly geared towards
modeling, one tip for the GF 7900 GT (like my XFX 520) range of cards.
-The 7900 GT card will produce serious redraw errors up to complete
blackouts if you use the current (german) driver.
Picking the "maya" preset doesn´t help this. Go to nvidia.com, look for the
betadrivers of the new series 9.x.x. The controlpanel is terrible (geared
towards novice users) but the glitches disappear.
Modeling:
-Never use the KP/L to insert SRT values manually and hit enter.
Depending on your settings and the current manipulator mode, you´ll end up
with an object that is scaled the desired amount but shifted to a remote
location in your scene. Don´t ask me why.
-If you want to rotate something, get used to holding the [shift] key, get´s
you reliable rotation in (default>preferences) 15° steps.
-Get used to the advantages of using custom [Ref] planes. It may sound
tedious but is worth the second it takes to set it. After a while you won´t
want to live without it.
- Turn off raycast selection in shaded, makes your life easier when
selecting in broad strokes [U/Y]
- [M/J/L] are great. Get a complete new feeling of power when you shift a
little polybugger (edge/point) over a surface without changing it´s
shilhouette. Mergthings to the point is a snap.
-If you really want to p**s off the Maya guys, tell them about the +/- keys,
then show off with [shift]&[+] and [shift]+[-]. They´ll ask you out.
-Never trust the [Extrude along Axis] direction, it may look straight, but
basically, it´s useless, deactivate [Y] and move it yourself. Remember,
using the "Inset" only works for a closed surface. Cap those open edges and
*just then and only then* do a nice, uniform inset. You´ll still be faster
than the Maya guys. Regarding the [Y] thing, soemeone here mentioned one
could edit the spdll to the own liking, I´ll look that up.
-If you duplicate something ALLWAYS freeze it while you still have it
selected. Otherwise, you´ll later easily hit the "freeze" on it´s (mother)
object and *baddabing* endup without the (child/dupe) kids. Sound familiar?
-Save early. Save often. Don´t trust the export as "model" function, use
dotXSI or even *.obj to CORRECTLY export EVERYTHING in your selection.
You´ll really only notice when it´s (too) late.
Cheers
tim
----- Original Message -----
From: "Bernard Lebel" <3dbernard(at)gmail.com>
To: <XSI(at)Softimage.COM>
Sent: Tuesday, May 30, 2006 7:29 PM
Subject: XSI Montreal "Tips & Tricks" session, looking for presenters
> Hello everyone,
>
> Me, Will and Eric are preparing the next XSI user group of Montreal,
> which would take place ideally in 3 weeks from now.
>
>
> We are looking for presenters for a very special type of presentation:
> [b]Tips & Tricks[/b].
>
>
> Basically, during one hour, several presenters would speak in turns
> for about 10-20 minutes each, just about any subject they want, as
> long as it fits into "trick that got this problem solved / trick that
> got this thing done".
>
> For instance, I will take one of those spots, and I plan to discuss
> two things (if time allows): how I got simple crowd shots done with
> particles, and how I solved certain issues with source paths.
>
> So we are looking for presenters willing to share their tricks, just
> about any possibly conceivable subject related to XSI. We are not
> expecting any ground-breaking tricks, just the little things that we
> generally take for granted -and never mention during typical
> presentations- but can make a big difference.
>
>
> If you are interested, please contact me (3dbernard -at_ gmail.com) or
> Will (will -at_ xsimontreal.com). Replace -at_ with (at).
> We look for 3-4 people, on top of me and possibly another presenter
> that remains to be confirmed.
>
>
> Thanks
> Bernard
> ---
> Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
> unsubscribe xsi
>
---
Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
unsubscribe xsi
---
Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
unsubscribe xsi
