Check if it runs as root (just to help track it down - if it does then
it may be trying to access your video card without any permissions -
though that seems out of place for xsibatch). Also make sure if you're
using fam rather than gamin that you've got the famd daemon running.
If all this fails install strace and save the output to file and start
looking through there for where it crashed and what it tried to do
beforehand.
Cheers,
Alan.
On 6/22/06, Alan Jones <skyphyr(at)gmail.com> wrote:
> hmmm - I've forgotten the other things for the Aborted list. It may
> still be hanging around on xsibase - I'll check through the archives
> for the list as well in case I put it there.
>
> Cheers,
>
> Alan.
>
> On 6/22/06, Bernard Lebel <3dbernard(at)gmail.com> wrote:
> > No, I assure you this part is working fine, Alan.
> >
> >
> > Bernard
> >
> >
> >
> > On 6/22/06, Alan Jones <skyphyr(at)gmail.com> wrote:
> > > Not whether the IP can be contacted - whether they can find out their
> > > IP from their name. If they can't do a lookup on their hostname and
> > > resolve it to an IP you'll have a problem.
> > >
> > > Cheers,
> > >
> > > Alan.
> > >
> > > On 6/22/06, Bernard Lebel <3dbernard(at)gmail.com> wrote:
> > > > Alan,
> > > > Yes I checked and IP is fine (checked through Python's socket module).
> > > > For you other suggestion I'll have to check tomorrow, I really can't
> > > > answer that question (I didn't setup the machine).
> > > >
> > > > François,
> > > > Thanks for the tip, I'll make sure to forward it to the appropriate person.
> > > >
> > > >
> > > > Thanks
> > > > Bernard
> > > >
> > > >
> > > >
> > > >
> > > > On 6/21/06, Alan Jones <skyphyr(at)gmail.com> wrote:
> > > > > Sorry - should have put a first guess in anyway - check the machines
> > > > > can get a good ip lookup on themselves. Either through your dns server
> > > > > or hosts file.
> > > > >
> > > > > Cheers,
> > > > >
> > > > > Alan.
> > > > >
> > > > > On 6/21/06, Alan Jones <skyphyr(at)gmail.com> wrote:
> > > > > > Have you had this particular configuration of machine working before?
> > > > > > i.e. software config
> > > > > >
> > > > > > Cheers,
> > > > > >
> > > > > > Alan.
> > > > > >
> > > > > > On 6/21/06, francois.painchaud(at)sympatico.ca
> > > > > > <francois.painchaud(at)sympatico.ca> wrote:
> > > > > > > Make sure the swap space is correctly set up.
> > > > > > >
> > > > > > > > De: "Bernard Lebel" <3dbernard(at)gmail.com>
> > > > > > > > Date: 2006/06/21 mer. PM 05:26:20 GMT-04:00
> > > > > > > > À: XSI(at)Softimage.COM
> > > > > > > > Objet: [Linux] Aborted
> > > > > > > >
> > > > > > > > Hello,
> > > > > > > >
> > > > > > > > We just formatted a bunch of Linux render nodes. When I try to run
> > > > > > > > xsibatch, using:
> > > > > > > >
> > > > > > > > /usr/Softimage/XSI_4.2/Application/bin/xsibatch -l
> > > > > > > >
> > > > > > > > I get an "Aborted" message right after the license messages, and it
> > > > > > > > just stops there, no other warnings, errors or messages.
> > > > > > > >
> > > > > > > > Anyone has any tip about this?
> > > > > > > >
> > > > > > > >
> > > > > > > > Thanks
> > > > > > > > Bernard
> > > > > > >
> > > > > > >
> > > > > > > ---
> > > > > > > Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
> > > > > > > unsubscribe xsi
> > > > > > >
> > > > > >
> > > > >
> > > > > ---
> > > > > Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
> > > > > unsubscribe xsi
> > > > >
> > > >
> > > > ---
> > > > Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
> > > > unsubscribe xsi
> > > >
> > >
> > > ---
> > > Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
> > > unsubscribe xsi
> > >
> >
> > ---
> > Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
> > unsubscribe xsi
> >
>
---
Unsubscribe? Mail Majordomo(at)Softimage.COM with the following text in body:
unsubscribe xsi
