Re: additive material blending

[Alastair <hearsum(at)glassworks.co.uk>]

what about this! I'm determined to help

Alastair Hearsum
Head of 3D



33/34 Great Pulteney Street
London W1F 9NP
T:+44 (0)20 74341182
F:+44 (0)20 74341183
http://www.glassworks.co.uk
http://www.glassworksamsterdam.nl

(Company registered in England with number 04759979. Registered office 7-9 Swallow Street, London, W1B 4DT. VAT registration number: 867290000)

DISCLAIMER: This e-mail and attachments are strictly privileged, private and confidential and are intended solely for the stated recipient(s). Any views or opinions presented are solely those of the author and do not necessarily represent those of the Company. If you are not the intended recipient, be advised that you have received this e-mail in error and that any use, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If this transmission is received in error please kindly return it to the sender and delete this message from your system.

Jeff McFall wrote:

Much appreciated, I am sure the bouquet is quite lovely.  J

However I believe it is the .rar that is the issue.  We have a stingy
email filter.

Thank you again for your efforts.

 

Jeff

 

From: owner-xsi(at)Softimage.COM [mailto:owner-xsi(at)Softimage.COM] On Behalf
Of Alastair
Sent: Tuesday, January 08, 2008 12:42 PM
To: XSI(at)Softimage.COM
Subject: Re: additive material blending

 

Here's a vase of flowers for you






Alastair Hearsum 
Head of 3D 

 

33/34 Great Pulteney Street
London W1F 9NP 
T:+44 (0)20 74341182 
F:+44 (0)20 74341183 
http://www.glassworks.co.uk  <http://www.glassworks.co.uk/> 
http://www.glassworksamsterdam.nl  <http://www.glassworksamsterdam.nl/> 


(Company registered in England with number 04759979. Registered office
7-9 Swallow Street, London, W1B 4DT. VAT registration number: 867290000)

DISCLAIMER: This e-mail and attachments are strictly privileged, private
and confidential and are intended solely for the stated recipient(s).
Any views or opinions presented are solely those of the author and do
not necessarily represent those of the Company. If you are not the
intended recipient, be advised that you have received this e-mail in
error and that any use, dissemination, forwarding, printing, or copying
of this e-mail is strictly prohibited. If this transmission is received
in error please kindly return it to the sender and delete this message
from your system. 



Jeff McFall wrote: 

Likely, but it was stripped from my email.
 
Any chance you could rename to something innocuous?
 
 
 
Thanks for sending
 
 
 
From:  owner-xsi(at)Softimage.COM <mailto:owner-xsi(at)Softimage.COM>  [
mailto:owner-xsi(at)Softimage.COM <mailto:owner-xsi(at)Softimage.COM> ] On
Behalf
Of Alastair
Sent: Tuesday, January 08, 2008 12:17 PM
To:  XSI(at)Softimage.COM <mailto:XSI(at)Softimage.COM> 
Subject: Re: additive material blending
 
 
 
Is this of any use
 
 
Alastair
 
 
 
 
 
Alastair Hearsum 
Head of 3D 
 
 GLASSWORKS   <http://www.glassworks.co.uk/sig/GW_Logo.jpg>
<http://www.glassworks.co.uk/sig/GW_Logo.jpg> 
 
33/34 Great Pulteney Street
London W1F 9NP 
T:+44 (0)20 74341182 
F:+44 (0)20 74341183 
http://www.glassworks.co.uk <http://www.glassworks.co.uk>
<http://www.glassworks.co.uk/> <http://www.glassworks.co.uk/> 
http://www.glassworksamsterdam.nl <http://www.glassworksamsterdam.nl>
<http://www.glassworksamsterdam.nl/>
<http://www.glassworksamsterdam.nl/> 
 
 
(Company registered in England with number 04759979. Registered office
7-9 Swallow Street, London, W1B 4DT. VAT registration number: 867290000)
 
DISCLAIMER: This e-mail and attachments are strictly privileged, private
and confidential and are intended solely for the stated recipient(s).
Any views or opinions presented are solely those of the author and do
not necessarily represent those of the Company. If you are not the
intended recipient, be advised that you have received this e-mail in
error and that any use, dissemination, forwarding, printing, or copying
of this e-mail is strictly prohibited. If this transmission is received
in error please kindly return it to the sender and delete this message
from your system. 
 
 
 
Jeff McFall wrote: 
 
A good while back there was a posting for how to create a material with
additive blending on transparency.
I can't find it.  Would anyone have that or another example handy they
could share?
 
Much appreciated in advance
Jeff
 
 
 
---
Unsubscribe? Mail   Majordomo(at)Softimage.COM
<mailto:Majordomo(at)Softimage.COM> 
 <mailto:Majordomo(at)Softimage.COM> <mailto:Majordomo(at)Softimage.COM>  with
the following text in body:
unsubscribe xsi
  
 
  

  

Attachment: additive_mixing.scn
Description: Binary data